INSTRUCTIONS FOR REPLACING "JANITOR.TXD" (invisible skin)

1) Download Spookie's "IMG Tool" from http://spookie.powerpill.co.uk (version 2.0)
2) Install IMG Tool. Extract the janitor.txd file from the San An Studios
archive. Note this location. 
3) Backup your gta3.img file to a safe location. (Found in 
/models, in your GTA:SA installation folder)
4) Right click on the original gta3.img and select "Properties". UNCHECK "Read Only" 
at the bottom of the panel. Click "Apply and OK" Do the same for gta3.dir.
5) Start the IMG Tool. Click File/Open, and choose your gta3.img file. DO
NOT CHOOSE YOUR BACKUP. 
6) Press the F2 key, or click Edit/Search to bring up the search box. Type in 
"janitor.txd" and press enter. Delete the selected file. Now click Commands/Add or
press CONTROL + A to bring up the file dialog. Navigate to the location that you 
extracted "janitor.txd" to, and choose it. Click OK. IF YOU HAVE NOT UNCHECKED 
"READ ONLY" ON THE GTA3.IMG FILE, THIS WILL NOT WORK. 
7) Click Commands/Rebuild Archive and click "Yes".
8) Start San An Studios and check to see if the skin installed. (Insert + C) 
It will look blank, but there is a shadow where the skins' feet would be, so you 
see exactly where you are.

If it works, congratulations! If not, go back over the steps above. Have fun!